- Automotive Industry
- Oil and Gas Industry
- Pulp & Paper Indusry
- Constructions
- Pharmaceuticals Industry
- Refining Industry
Golden Island Trading is a leading Fasteners Manufacturer in Saudi Arabia. We supply a wide span of Fasteners in different shapes, sizes, and thicknesses based on the requirements of the client. We perform hard to make sure that our fastener are of the adequate quality. Because of our constant commitment of quality and service, we have received several orders worldwide.
We deliver Fasteners in different grades, and dimensions as a leading supplier of these products. There are three major fasteners used in industries: Stainless Steel Fasteners, Carbon Steel Fasteners, and High Tensile Fasteners. Our Fastener division is known as We as a Fasteners Manufacturers provide different types of fasteners such as Bolts, Nuts, Screws, Washers and more. We manufacture, Stock & Supply all kinds of Stainless Steel Fasteners in all sizes at the best price.
Golden Island Trading Est is one of the most extensive Fasteners Manufacturer in Saudi Arabia. Our Fasteners are customizable and utilized in many industries, including automotive, construction, oil & gas, and onwards. The Fasteners are of high-level corrosion protection and weldability making them very popular. Fasteners manufactured by Golden Island Trading are of premium raw materials, and our skilled and professional staff ensures that quality is upheld at every level. Our Fasteners are developed by national and international standards.
The most selected grades used in stainless steel fasteners are Series 200, 300, and 400. We also hold a huge inventory of Duplex Stainless Steel Fasteners and quality Stainless Steel Fasteners. Golden Island Trading takes care of the needs of their clients & makes sure all Steel Bolts, Steel Nuts, Steel Washers, Steel Screws, and steel fasteners are in order as per client requirements before dispatch.
| Fasteners | |||
|---|---|---|---|
| Material | Nuts Size | Length | Standard & Specification |
|
M02 to M33 | 3 mm to 200 mm |
|
| Elements | Range | Product Variation, Over or Under B |
|---|---|---|
| Carbon | 0.37-0.49 % D | 0.02 % |
| Manganese, max | 0.65-1.10 % | 0.04 % |
| Phosphorus, max | 0.035 % | 0.005 % over |
| Sulfur, max | 0.040 % | 0.005 % over |
| Silicon | 0.15 - 0.35 % | 0.02 % |
| Chromium | 0.75-1.20 % | 0.05 % |
| Molybdenum | 0.15-0.25 % | 0.02 % |
| Mechanical Properties | Fastener |
|---|---|
| Tensile Strength | Refers to the maximum load under tension a fastener can handle before being compromised. |
| Tensile Load | Refers to the maximum load (pressure in tension) exterted by the installation material against the fastener before it will compromise. |
| Ultimate Tensile Stress | Refers to the estimated minimum where a fastener will compromise its integrity. |
| Elongation | Refers to the stretching and deformation that will occur to a fastener caused by a load exceeding its capacity. |
| ProofLoad | A test load a fastener MUST be able to hold without causing any compromise in its integrity. Considered the maximum safe load of a fastener. |
| Pre-Load | One of the most important measures in the industry. Refers to the axial load placed on a fastener. Pre-load is considered to be 75% if the proofload. |
| Shear Load | The load a fastener can handle when two materials are pushing against each other onto the fastener. This will vary if the load is pressing against a fasteners shoulder versus it’s threading. |
| Torsional Strength | Maximum torque a fastener can handle before the threading becomes warped or destroyed. |
| Yield Strength | Refers to the load a fastener can handle before begining to stretch. |
| Yield Point | The definitive point a fastener can no longer handle the load before stretching. |
| Fatigue Strength | Fasteners expand and contract many times due to elemental stresses. Fatigue strength is the maximum number of times this can occur in a cycle before some critical component of the fastener becomes compromised. |
| Creep Strength | Refers to a fastener that has heated up and elongated due to the load under pressure and the heat. |
| Hardness | Refers to a fasteners ability to scratch, mar or otherwise damage another material without itself being damaged. |
Email: info@gtesaudi.com
Number: +966 53 576 7850
Every year we exports more than 12 tonnes of fastener, accounting for 35% of those fastener. We usually send to a large number of nations for our most recent clientele. We are able to convey and complete the demands and desires of our clients because of our consistent supply of fastener.
| Countries We Export Fasteners | |||||
|---|---|---|---|---|---|
| Saudi Arabia | Oman | Kuwait | Netherlands | Iran | |
| Bahrain | Qatar | UAE | Africa | Europe | |
| Nigeria | Mexico | Canada | Venezuela | United Kingdom | |
| United States | South Africa | Malaysia | Bangladesh | Turkey | |
| Singapore | Sri Lanka | Australia | Brazil | Germany | |
| Russia | Vietnam | Jordan | Portugal | Egypt | |
| Morocco | Israel | Costa Rica | Iraq | Madagascar | |
| Kazakhstan | Thailand | Romania | Philippines | Spain | |